본문 바로가기

ODROID U3

오드로이드 U3[SD카드에 우분투 올리기(윈도우)]

사실 개발자가 아닌 이상 초보자라면 오드로이드를 사고는 막막했을 것입니다. 

"전원만 키면 서버가 되는건가?? 리눅스가 켜지는 것인가??"라는 생각을 가질 것입니다.

 

하지만 미안하게도(?) 오드로이드는 그냥 컴퓨터가 아닙니다. 



전원만 주어서는 동작하지를 않지요 

 

SD카드나 eMMC에 우분투(리눅스) 이미지를 write 해야하는데요 

 

방법이 크게 2가지가 있습니다. 윈도우에서 하는 방법과 리눅스에서 하는 방법입니다.

 

오늘은 윈도우에서 하는 방법을 알려드리겠습니다.

 

오드로이드 홈페이지에 들어가도 자세히설명되어 있는데요 내용은 다음과 같습니다.

(링크 : http://com.odroid.com/sigong/blog/blog_list.php?bid=130)

 

To boot the ODROID-X/X2/U/U2, you need an SD card or eMMC module installed with a bootloader and a suitable Operating System.  

Some ODROID kits will come with a ready-to-go card, but if you didn't purchase one you will need to prepare your own:

Official images are available in this link.

Warning! When you write the ODROID image to your SD card you will lose all data that was on the card.

Copying the image to an SD Card on Windows

  1. Download a zipped image from this link or other mirrors
  2. Extract the image file .img or .odt from the zip file.
  3. Insert the SD card into your SD card reader and check what drive letter it was assigned. You can easily see the drive letter (for example G:) by looking in the left column of Windows Explorer. If the card is not new, you should format it; otherwise Win32DiskImager may hang.
  4. Download the Win32DiskImager utility. The download links are on the right hand side of the page, you want the binary zip.
  5. Extract the zip file and run the Win32DiskImager utility. You may need to run the utility as Administrator.
  6. Select the *.img image file you extracted earlier
  7. Select the drive letter of the SD card in the device box. Be careful to select the correct drive; if you get the wrong one you can destroy your computer's hard disk!
  8. Click Write and wait for the write to complete.
  9. Exit the imager and eject the SD card.
  10. Insert the card in the ODROID, power it on, and it should boot up. Have fun!

감이 오시나요?? ㅋㅋㅋㅋㅋ

 

그렇습니다. 영어에요!!!! 눈에 확 들어오지 않지요?? ㅋㅋㅋㅋ

 

그래서 제가 따라만하면 초보자도 쉽게 할 수 있게 알려드리겠습니다. 

 

 우선 전 포스팅에서부터 계속 해왔던 우분투 이미지와 SD카리더기, 마이크로 SD카드가 있어야 합니다.

다시요약해보면

 

1. SD 카드 포맷

2. 우분투(리눅스) 다운로드

3. 7-Zip으로 압축풀기

 

이렇게 준비가 되었다면 이제 우리는 리눅스를 write하기 위해서 Win32DiskImager 라는 utility를 다운받아야 합니다. 아래 링크 했습니다.

(링크 : https://launchpad.net/win32-image-writer)

 

 

 

다운을 받고 설치하면 됩니다.

그리고 실행을 시키면 다음과 같은 창이 나옵니다. 

 


 

 

나의 SD 카드가 어디 있는지 정확히 알아야 합니다.

그렇지 않으면 잘 못했다간 윈도우를 날려버릴 수도 있습니다.

SD카드 경로를 지정하고 옆에 폴더를 클릭해서

지금까지 했던 7-Zip으로 풀은 이미지 파일을 클릭합니다.






 

Write하면 됩니다.



 

 

다 되면 이제 끝입니다. 간단하지요?? ㅋㅋㅋㅋ

오드로이드에 SD카드를 연결하고 HDMI 모니터에 연결해서 전원을 키면 리눅스가 실행됩니다. 

(다음에는 HDMI말고 DVI모니터 방법을 포스팅하겠습니다.) 

오드로이드 암호는 odroid입니다. 

화면이 핸드폰으로 찍어서 어두워요 ㅠ_ㅠ